I would strength the bends at both inputs a bit but otherwise not bad.
PeeDidy on
10/10
No notes.
nattynice on
This works, I would have just layed my phone on the charger box.
CantaloupeCamper on
I am impressed.
AverageInfamous7050 on
Yeah that’s good on equipment. Although clever, I hope it falls & breaks.
Guygenius138 on
Just set the phone on top of the wall wart and don’t stress your cable.
Lady_Penrhyn1 on
…how old is this image?
figmentPez on
That is going to destroy the cable with how much stress is on the connections, especially the bend at the phone port.
_Sh4_d0w on
The shit you have to do just to get the perfect angle where the charger works.
PolyJuicedRedHead on
“Clever girl.” – Jurassic Park
CoinCannaDuhh on
When the charging cable is fucked up
Dangerous-Glove-9503 on
Everything is good but wire bending at the ends
deathentry on
Lean it on floor upside down against the wall?
skenvoy on
Not outside the lecture theatre in OGGB!
Don’t they have charging stations?
ShrimpieAC on
Is this someone you?
Spiritual-Rip-6248 on
The cord is not enjoying this.
Gareth274 on
Nobody here knows shit. This person is doing this because the cable or port aren’t making proper contact and must be held firm to charge. Just like your mother, the port is worn and clapped out, and anything you put in hardly touches the sides. This setup uses the weight of the phone to hold the cable in place to make enough contact to charge.
AggressiveArcher9227 on
but the cable is bent 😧
TheFrenchSavage on
Now do a tensegrity.
NighthawK1911 on
The charger is wide enough to accommodate the phone.
This is just putting extra wear on the charging port of the phone.
Just lay down the phone up the charger?
The prongs of the plug is way more robust than the charging port.
Echo-The-Protogen on
not original seen it over ten years ago
a0604912red on
Stress test
Specific_Current_642 on
teach me your ways
another_accounting on
Now this…this may be genius.
JamesAdsy on
I saw someone do this on the Tube (Well, Elizabeth line) using the port that’s waist height. It went about as well as you’d think
Axerin on
Could have just balanced it on the brick instead smh
Dapper_Visual_4449 on
that setup has better support than my career
IPanicKnife on
The floor is lava
SaidwhatIsaid240 on
Just lay it on the ground?
RockyGamer1613 on
That is a strange way to charge a phone I would have leant it on the wall
RickyTheRickster on
That’s actually pretty neat but definitely not good for the wire
Epic_Elite on
I have a feeling they have done this so many times that they have this knot down to muscle memory and I want to see the setup in action. Lol
The_Advocate07 on
This is Engineering. Not Architecture.
Dont get them mixed up again. They really dont like that.
Miserable-Plenty1964 on
That’s a hot wire. It’s not grounded
Alfonze on
Why does the plug look like it’s at some insane angle relative to the straight line of the floor?
38 Comments
Is touching the ground a bad thing?
that charger got better suspension than my car
This is mildly interesting thank you
I would strength the bends at both inputs a bit but otherwise not bad.
10/10
No notes.
This works, I would have just layed my phone on the charger box.
I am impressed.
Yeah that’s good on equipment. Although clever, I hope it falls & breaks.
Just set the phone on top of the wall wart and don’t stress your cable.
…how old is this image?
That is going to destroy the cable with how much stress is on the connections, especially the bend at the phone port.
The shit you have to do just to get the perfect angle where the charger works.
“Clever girl.” – Jurassic Park
When the charging cable is fucked up
Everything is good but wire bending at the ends
Lean it on floor upside down against the wall?
Not outside the lecture theatre in OGGB!
Don’t they have charging stations?
Is this someone you?
The cord is not enjoying this.
Nobody here knows shit. This person is doing this because the cable or port aren’t making proper contact and must be held firm to charge. Just like your mother, the port is worn and clapped out, and anything you put in hardly touches the sides. This setup uses the weight of the phone to hold the cable in place to make enough contact to charge.
but the cable is bent 😧
Now do a tensegrity.
The charger is wide enough to accommodate the phone.
This is just putting extra wear on the charging port of the phone.
Just lay down the phone up the charger?
The prongs of the plug is way more robust than the charging port.
not original seen it over ten years ago
Stress test
teach me your ways
Now this…this may be genius.
I saw someone do this on the Tube (Well, Elizabeth line) using the port that’s waist height. It went about as well as you’d think
Could have just balanced it on the brick instead smh
that setup has better support than my career
The floor is lava
Just lay it on the ground?
That is a strange way to charge a phone I would have leant it on the wall
That’s actually pretty neat but definitely not good for the wire
I have a feeling they have done this so many times that they have this knot down to muscle memory and I want to see the setup in action. Lol
This is Engineering. Not Architecture.
Dont get them mixed up again. They really dont like that.
That’s a hot wire. It’s not grounded
Why does the plug look like it’s at some insane angle relative to the straight line of the floor?